Enttec S-Play Nano handleiding

35 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 35
S-PLAY NANO (70095)
Visit the ENTTEC website for the latest version.
..
11|
ID: 5950772
USER MANUAL
Document Updated: Dec 2023
LED Indicator
The LED status indicator is used to determine the S-PLAY NANO’s current state:
LED Colour
S-PLAY NANO Status
White
Idle
Blue
Device starting up
Green
Play/Pause
Yellow
Record
Red
Boot/Error
Purple
IP Conflict
Flashing Red and Blue
Updating firmware
Flashing Red
On Reset/Trigger button press
Reset Button
The reset button on the device providing multiple control options and ensuring the device's adaptability
to various operational scenarios.
This reset button gives access to the functionalities below:
Trigger Playlists
The reset button can be configured as a trigger button for playlists. Detail settings see Trigger section
in this document.
Boot Loading
This function assists to restore or recover the device's firmware to a stable state. This can be performed
by following steps:
Press and hold the reset button while
powering up the unit.
Continue holding and release the button
within 10 seconds of powering up.
The unit will load the boot and the web
interface will be redirected to the boot page.
Manually refresh the page if needed.
On this page, users can choose to upload a
firmware file, perform a factory reset at the
current firmware version, or revert to the
factory-state firmware.
Reset Network Configuration
In case of IP conflicts or network issues, follow these steps to reset the network configuration to default
(DHCP enabled with fallback IP 192.168.0.10):
Press and hold the reset button while powering up.
Continue holding for 10 seconds until the LED turns Green.
The device will restart automatically.
The network settings will be reset to default.
1.0.0

Bekijk gratis de handleiding van Enttec S-Play Nano, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEnttec
ModelS-Play Nano
CategorieVerlichting
TaalNederlands
Grootte5605 MB