Enttec S-Play Lite handleiding
Handleiding
Je bekijkt pagina 49 van 50
S-PLAY (70092)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
49 |
ID: 5950188
Document Updated: April 2024
Servicing, Inspection & Maintenance
The device has no user serviceable parts. If your installation has become damaged, parts should
be replaced.
Power down the device and ensure a method is in place to stop the system from becoming
energised during servicing, inspection & maintenance.
Key areas to examine during inspection:
Ensure all connectors are mated securely and show no sign of damage or corrosion.
Ensure all cabling has not obtained physical damage or been crushed.
Check for dust or dirt build up on the device and schedule cleaning if necessary.
Dirt or dust buildup can limit the ability for a device to dissipate heat and can lead to damage.
The replacement device should be installed in accordance with all steps within the installation guide.
To order replacement devices or accessories contact your reseller or message ENTTEC directly.
Cleaning
Dust and dirt build up can limit the ability for the device to dissipate heat resulting in damage. It’s
important that the device is cleaned in a schedule fit for the environment it is installed within to ensure
maximum product longevity.
Cleaning schedules will vary greatly depending on the operating environment. Generally, the more
extreme the environment, the shorter the interval between cleanings.
Before cleaning, power down your system and ensure a method is in place to stop the system
from becoming energised until cleaning is complete.
Do not use abrasive, corrosive, or solvent-based cleaning products on this device.
Do not spray on the device or accessories. The device is an IP20 product.
To clean an ENTTEC device, use low-pressure compressed air to remove dust, dirt and loose particles. If
deemed necessary, wipe the device with a damp microfiber cloth.
A selection of environmental factors that may increase the need for frequent cleaning include:
Use of stage fog, smoke or atmospheric devices.
High airflow rates (i.e., in close proximity to air conditioning vents).
High pollution levels or cigarette smoke.
Airborne dust (from building work, the natural environment or pyrotechnic effects).
If any of these factors are present, inspect all elements of the system soon after installation to see
whether cleaning is necessary, then check again at frequent intervals. This procedure will allow you to
determine a reliable cleaning schedule for your installation.
Bekijk gratis de handleiding van Enttec S-Play Lite, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Enttec |
| Model | S-Play Lite |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 8041 MB |
