Enttec EMU 70681 handleiding
Handleiding
Je bekijkt pagina 11 van 13
EMU HARDWARE (70681)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
1 |
ID: 5956415
Document Updated: March 2025
OCTO MK2
▪ DHCP-enabled network.
▪ Art-Net
▪ Port 1 Universe 0-7, Port 2 Universe 8-15.
Note: Users would still need to pre-configure Pixel order and Protocol in OCTO.
Firmware Update
The firmware update procedure can be used to:
Update to the latest feature set.
Reset EMU HARDWARE if it ever gets stuck or stops responding. (Eg., Error mode).
The following steps will explain the firmware update procedure:
1. Launch the EMU Software on your computer and select of the discovered EMU Hardware from
the device list.
2. either choose the default firmware from the drop-
down list or click Choose Firmware to locate a file from
another source.
3. After selecting the firmware, click Update Firmware
and allow the process to complete. Ensure the USB
cable remains connected during the update. Progress
will be displayed on the screen.
4. Once the update is finished, close the page. The
firmware update is now complete.
Note: Please ensure your EMU Software is updated to the latest version.
Factory Reset
In certain scenarios, such as when the device is not discoverable or has unstable firmware, you may
need to perform a factory reset directly from the device. Follow these steps:
1. Use a XLR to TRS or XLR to TS mic cables to connect
the 3-Pin XLR DMX port and the TRS port.
2. Use a USB Type-C cable to connect the EMU
Hardware to your computer. The LED will flash red,
indicating it is in boot mode.
3. Launch the EMU Software on your computer and
select of the discovered EMU Hardware from
the device list.
4. The EMU Software will prompt you to the firmware
tab, where you can perform firmware updates or
other maintenance tasks.
PC with EMU Software
Bekijk gratis de handleiding van Enttec EMU 70681, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Enttec |
| Model | EMU 70681 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2278 MB |