Ensemble Designs BrightEye 24 handleiding

Niet gecategoriseerd

Ensemble Designs

17 pagina's

PDF beschikbaar

Handleiding

BrightEye-7

BrightEye PC Control

The BrightEye PC application is included on CD-ROM with every BrightEye unit.

Installation and instructions for using BrightEye PC are given in the data pack

that accompanies the application.

If the unit is connected to a computer running the BrightEye PC application, the

following menus are available for controlling and monitoring the

BrightEye 24 unit.

Config Menu

• Input Pres – indicates the presence of an SDI input. Shows: None, 525

Lock, or 625 Lock.

• Setup – enable or disable setup on output by selecting On or Off. Only

available on 525 NTSC output.

• DeMux Status – indicates the status of the AES group selected for disem-

bedding. Shows group number and if there is valid audio in that group.

• Group Sel – selects the AES group for disembedding. This pulldown lets

you chose between: Group 1, Group 2, Group 3, or Group 4.

• Peak Indicator – selects the amount of headroom to use in determining

peak levels. This pulldown lets you chose between: Clipping, 2 dB

Headroom, 4 dB Headroom, 6 dB Headroom, 8 dB Headroom, or 10

dB Headroom.

• Dig Ref Level – selects the expected reference level for the embedded

audio. This pulldown lets you choose between: -20 dBFS or -18 dBFS.

• Anlg Out Level – selects analog output reference level. This pulldown lets

you chose between: -10 dBu or +4 dBu.

BrightEye 24

Bekijk gratis de handleiding van Ensemble Designs BrightEye 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.