Ensemble Designs BrightEye 16 handleiding

Niet gecategoriseerd

Ensemble Designs

24 pagina's

PDF beschikbaar

Handleiding

BrightEye 16 D-to-A Converter TBC/FS and Disembedder

Audio Mixer Menu

• Outputs 1-4 – provide peak/VU status, with the same methodology as

the front panel VU indicators, but on a per channel basis, rather than per

channel pair. Peak/VU indicators illuminate red when the audio level on

that channel exceeds the headroom level set by the user with the Peak

Indicator control. Additionally, the VU indicator illuminates orange when

the output is above 0 VU, illuminates green when the output is above -20

VU, and doesn’t illuminate when the output is below -20 VU.

• Input Ch 1 – assign Input Channel 1 to the desired output bus or tie to

Channel 2. Set the input level using the slider control or by entering a

number in the window and pressing the Enter key on your PC.

• Input Ch 2 – assign Input Channel 2 to the desired output bus or tie to

Channel 1. Set the input level using the slider control or by entering a

number in the window and pressing the Enter key on your PC.

• Input Ch 3 – assign Input Channel 3 to the desired output bus or tie to

Channel 4. Set the input level using the slider control or by entering a

number in the window and pressing the Enter key on your PC.

• Input Ch 4 – assign Input Channel 4 to the desired output bus or tie to

Channel 3. Set the input level using the slider control or by entering a

number in the window and pressing the Enter key on your PC.

Selecting the Tie button in Input Ch 1 or Input Ch 2 will tie the two controls

together. Selecting the Tie button in Input Ch 3 or Input Ch 4 will tie the

controls for these channels together.

Select the Default button to return to the default value.

Select the Invert button to invert the phase of the audio content.

BrightEye-10

Bekijk gratis de handleiding van Ensemble Designs BrightEye 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.