Engel MV 7127 handleiding
Handleiding
Je bekijkt pagina 30 van 36
30
1. TV standard:
a) after switching settings mode,indicator displays current TV standard (see tables 1-10);
b) to set necessary TV standard, press button “+” (see tables 1-10);
c) after TV stanard changing, modulator sets to rst channel of selected TV standard (see
tables 1-10),other settings remains unchanged.
2. Switch on test pattern generator:
a) press “-” button;
b) switching between OFF and ON by pressing button “+”, “n0” - test pattern generator
OFF,“ES ”-test pattern generator OFF. “ts”-test pattern generator ON.
3. Fine tuning of video carrier frequency:
a) press button “-”;
b) shift video carrier frequency by pressing button “+” (see table 11).
4. Picture/sound ratio switching:
a) press button “-”;
b) switching between 12dB and 16 dB by pressing button “+”.
5. Output signal switching:
a)press button “-”
b)switching between RF ON and RF OFF by pressing button “+”( “on”-RF ON, “OF”-RF OFF).
PROTECTION FROM UNAUTHORIZED ACCESS
To prevent unauthorized access buttons “-” and “+” simultaneously twice for 3 sec. To revert
to normal to operation, repeat above procedure.
OUTPUT SIGNAL LEVEL ADJUSTMENT
Use a regulator ( gure 1,position 5) to adjust an output level.Output level adjustment range is
0-15dB.
TECHNICAL CHARACTERISTICS
Type MV7127
Video Input frequency Range 20Hz-6MHz
level/impedance 1V ±1dB/75Ω
Bekijk gratis de handleiding van Engel MV 7127, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Engel |
| Model | MV 7127 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5978 MB |