Handleiding
Je bekijkt pagina 63 van 88
EN
63
PROBLEM SOLUTION
No power • Check if the AC cord of TV is plugged in or not. lf there’s sill no
power, please disconnect the plug, and reconnect to the socket
ater 60 seconds. Turn the power back on.
Signal not received properly • Double or phantom images may appear on your TV if there
are high buildings or mountains close to where you are. You can
adjust the image thru manual operaion: consult instrucion of
vernier regulaion, or adjust the direcion of the external antenna.
• lf you use an indoor antenna, under certain circumstances signal
recepion may be more diicult. Adjust the direcion of the anten-
na for opimum recepion. lf this does not improve recepion, you
may have to switch to an externa! antenna.
No picture • Check if the antenna at the back of the TV is connected properly.
• View other channels to see if the problem sill occurs.
Video appears with no audio • Try increasing the volume.
• Check if the TV’s sound is on mute or not.
Audio is present, but video does
not appear or is discolored
• Try adjusing the contrast and brightness.
Staic noise afects video and
audio quality
• Check if the antenna at the back of the TV is connected properly.
Broken lines on screen • Electrical appliances such as hair dryers or vacuums etc. may be
interfering with your TV set. Switch these appliances of.
Remote doesn’t work • Make sure the plasic bag which came with the remote control is
removed. Try using the remote in a shorter distance from the TV.
Check if the placement of the bateries is correct, or try using new
bateries with the remote control.
• The TV will go into Standby mode if it receives no response in a
few minutes.
No video (PC mode) • Please check if the cable is connected to the HDMI port correctly,
or if the cable is bent in some places.
Screen is too bright or dark (PC
Mode)
• Adjust the brightness or contrast in the main menu.
No response from the PC • Check if the PC’s display resoluion is set to a compaible resolu-
ion for the TV.
Lines appearing when a device is
connected to the RCA port
• Make sure you are using a cable of good quality.
Problems are unresolved • Unplug the power cable and wait for 30 seconds, then reconnect
to the socket. lf problems sill persist, do not atempt to repair the
TV by yourself. Kindly contact the service center.
Do not leave your TV displaying a staic image, whether it is from a paused video, menu screen, etc. for
an extended period of ime, doing so will damage the display and may cause image burn-in.
HELP
Bekijk gratis de handleiding van Engel LE4085SM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Engel |
| Model | LE4085SM |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 11655 MB |
