Enabot ROLA Smart Pet Water Fountain handleiding

Niet gecategoriseerd

Enabot

27 pagina's

PDF beschikbaar

Handleiding

Safety Instructions

Please read the following safety instructions carefully and take normal safety

precautions before using this product.

1. The product is suitable for DC output 5V 2A power adapter. Please use a power

adapter that complies with relevant national and regional standards.

2. If the device cannot work properly due to damage from falling, being placed

outdoors, or water intrusion, please stop using it immediately.

3. Please do not place, charge or use this device outdoors or in the bathroom. Place the

equipment at least one meter away from the pool. Do not place the device on wet ground

or expose it to rain or snow.

4. Do not touch the device's power supply with wet hands.

5. Do not use damaged power cords or plugs. If the power cord is damaged, please

contact your supplier or the manufacturer's after-sales maintenance department

immediately to replace it with a new one to avoid damage.

6. When unplugging the charging device, please hold the charging device with your

hands and do not drag the power cord. Do not use power extension cords for power.

7. When in use, the equipment must be provided with safely-rated low voltage that

meets the relevant requirements.

8. Please place the device on a table away from heat sources, ﬁre sources or other high

temperatures.

9. Do not immerse the base in water or any other liquid.

10. If the base is exposed to water, please dry the outer surface before continuing to

use it.

11. Do not use hot water in the bucket.

12. Please do not disassemble, modify or repair this product by yourself, otherwise you

will lose all warranty and service rights.

Packaging Information

① Water Fountain ② Charging Cable ③ Manual

Product Introduction

④

⑤

⑥

⑦

⑧

⑨

⑩

Nozzle

Stainless steel basin

Filter

Filter tray

Outlet pipe

Bucket

Outlet pipe bracket

Sponge

Rotor

Bucket base

Status indicator light

Touch button

PIR sensor

Type-C charging port

3. Mode Description

1. Status Indicator Light

Working Status

Status Indicator Light

Waiting for network conﬁguration

continuous water mode

sensor mode

low battery reminder (wireless version)

Flashing blue

Steady white

Steady green

Flashing red

2. Operation Key

Operate State

power on

enter network conﬁguration mode

switch water outlet mode

power oﬀ

Press and hold for 3 seconds(from oﬀ state)

Press and hold for 3 seconds (from on state)

Click

Click + long press for 3 seconds

Mode Description State

Continuous water mode

Sensor mode

*By default, the device sleeps for 15 seconds after each water discharge. If no water

is detected within 2 hours, the device will automatically discharge water once.

*The water-release time and sleep time can be set manually in the ROLA App

The device will discharge water once if it senses the approach

of a person/pet

The device continuously discharges water(must be plugged in)

Bekijk gratis de handleiding van Enabot ROLA Smart Pet Water Fountain, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.