Empress Effects Zoia handleiding
Handleiding
Je bekijkt pagina 32 van 40
LOAD A PATCH VIA MIDI(PROGRAM CHANGE MESSAGES)
You can activate a patch by sending a MIDI program change
message on the MIDI channel selected in the Config Menu.
Send the Program Change number that corresponds to
the patch you’d like to load, keeping in mind that ZOIA
patches begin at number 0.
ENGAGE AND BYPASS VIA MIDI
You can change the bypass state of ZOIA by sending Control
Change #60 with a value of 127 (engaged), 0 (bypassed), or 64
(toggle bypass state) on the selected MIDI channel.
CONTROL PORT
The control port jack allows the ZOIA to be controlled by a
multitude of devices. Note that the ZOIA can only be connected
to one such device at a time, and the device must be selected
in the Config Menu.
MIDI
The ZOIA Control Port can receive MIDI messages on the tip
of a ¼” TRS connector and send MIDI messages on the ring
of a ¼” TRS connector. Note that when the MIDI ports are in
use, the Control Port will only be able to send MIDI out, and
not accept MIDI in. Be sure to use a TRS connector instead of
a standard TS patch cable if you wish to send MIDI messages
from the ZOIA.
32
Bekijk gratis de handleiding van Empress Effects Zoia, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Empress Effects |
| Model | Zoia |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2275 MB |
