Empress Effects Echosystem handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 29 van 32

FIRMWARE UPDATES

This pedal has rmware that can be updated with an SD card.

Performing A Firmware Update

1) download the rmware le o the website

www.empresseects.com/echosystem-rmware

2) copy the le to the root directory of the SD card

(a high-capacity SD card that’s been formaed FAT32)

3) insert the SD card then power on the pedal.

4) The preset LEDs should marquee yellow for a bit, then all

turn green when the update is complete.

5) remove SD card, cycle the pedal’s power, and you’re good!

SD Card Constraints

There should only be one paron on the SD card because the

pedal only looks at the rst paron on the disk. SD card must

be V2 high speed. Nowadays this is the most common type.

Firmware Update Error Codes

The preset LEDs will blink to signal an error:

1. unusable card

2. V1 card

3. V2 standard card

4. unable to read disk

5. valid FAT volume not found on SD card.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Empress Effects Echosystem, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Empress Effects (Niet gecategoriseerd)

Handleiding bekijken

Empress Effects Zoia

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd