Empress Effects Echosystem handleiding
Handleiding
Je bekijkt pagina 22 van 32
Recalling a preset via MIDI (Program Change Messages)
You can acvate a preset by sending a MIDI program change
message. For example, sending a program change message of 7
acvates preset 7.
Midi with Preset Out
The Echosystem can send out MIDI program changes on the
ring of the control port jack whenever a preset is loaded on
the Echosystem. The Echosystem will send out these program
changes on the 4 channels above the Echosystem’s current
MIDI channel.
For example, if the Echosystem is set to MIDI channel 5 and
preset 3 is loaded, the Echosystem will send out MIDI program
change 3 on MIDI channels 6, 7, 8 & 9.
Midi Beat Clock
Modes that accept a tap tempo input will respond to MIDI clock
messages. MIDI clock species quarter notes, subdivided into
24 MIDI messages. The Echosystem’s delay me gets set to a
quarter note. Note that MIDI clock is only funconal in Global
Tap so that presets can be set to either Local Tap or Knob and
ignore the MIDI clock.
Midi Control Changes
The Echosystem can be controlled with MIDI control change
messages. Opposite is a table that shows which MIDI control
change number controls each Echosystem parameter.
Bekijk gratis de handleiding van Empress Effects Echosystem, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Empress Effects |
| Model | Echosystem |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4747 MB |
