Empress Effects Echosystem handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 15 van 32

V30 LOOPER

The Echosystem contains a multrack looper which can record

loops up to 10 minutes. The looper is available in rmware

version 2.03 and up. The latest rmware can be found on our

website at www.empresseects.com/echosystem-rmware

The looper requires an SD card that says V30 on it. Numbers larger than V30

(V60, V90, etc.) are ok too.

An SD card must be inserted into the Echosystem to operate the looper.

WARNING! The V30 looper will corrupt any data on the SD card, so

don’t use a card with important stu on it!

ENABLING THE LOOPER

To enable the looper, enter Advanced Conguraon (see

Advanced Conguraon). Turn the mode knob unl the Tape

Green LED is lit, then turn the delay me knob clockwise unl

the second preset LED is lit. The looper will be enabled upon

exing Advanced Conguraon.

Eects Roung (making looper pre or post eect)

While sll in Advanced Conguraon, turn the mode knob unl

the Analog Green LED is lit, and then turn the delay me knob

to select either looper pre (preset LED 1) or post (preset LED 2)

eect. Exit Advanced Conguraon to save your sengs.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Empress Effects Echosystem, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Empress Effects (Niet gecategoriseerd)

Handleiding bekijken

Empress Effects Zoia

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd