EMOS P57000TR handleiding
Handleiding
Je bekijkt pagina 7 van 54
7
Technical Specications
Enclosure: IP20
Input voltage: 230 V~, 50 Hz
Output voltage: 8, 12, 24 V AC
Transformer description (see Fig. 1)
1 – connection terminals
2 – dimension drawing
3 – connection diagram
Connection diagram with bell P57101, P57102 and button
P57000T (see Fig. 2) – not included
Installing the Doorchime, Doorchime transformer,
Doorchime button
The chime is designed for indoor use only.
The installation may only be performed by an appropriately qualied
person.
During installation, follow applicable standards.
Note: Only one power mode can be used at a time – battery or trans-
former power. Connecting batteries while operating from another
power source may result in an explosion hazard.
The total length of wires connecting the doorbell to the push button
should not exceed 5 meters.
The electrical wiring should use a wire suitable for the specic
installation conditions, with a cross-section of between 0.5 mm
2
and 2.5 mm
2
.
1. Disconnect the source of 230 V AC power supply before
installation. Use a measuring instrument to make sure the
wiring is not live.
2. Remove the front of the chime cover, unscrew the rear button
cover.
3. Choose a spot for the doorchime and button, drill 2 holes match-
ing the spacing of the mounting holes on the doorbell and insert
wall plugs into the wall.
4. Insert cables into the doorchime‘s opening for wiring and mount
the doorchime to the wall with screws.
Bekijk gratis de handleiding van EMOS P57000TR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EMOS |
| Model | P57000TR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1446 MB |
