EMOS P56PR2 handleiding
Handleiding
Je bekijkt pagina 6 van 122
6
P56PR3 – 3× fan units, temperature sensor with control unit, adapter, 2× interconnecting cables,
double-sided adhesive tape, hook-and-loop fastener
P56EXT1 – fan, interconnecting cable
Fan Description (See Fig. 1)
1 – sliders
2 – magnets
3 – connector for control units
4 – space for optimal airow
5 – fans
6 – connectors for interconnecting cable
7 – slots for magnets
8 – feet
9 – slots for feet
10 – control unit screen
11 – temperature sensor
12 – magnet
13 – connector for plugging in the adapter
14 – button for setting fan speed/controlling
temperature
15 – up/down button
16 – adapter
17 – interconnecting cable
Setting Temperature/Fan Speed
Press the settings button on the control unit repeatedly until the screen displays:
°C – temperature setting
Use the up/down buttons to set at what temperature the fan should activate. The factory setting
is 28°C.
Example: The temperature is set to 40°C. If the temperature sensor detects that the temperature of
the radiator is 40°C or more, the fan starts.
If radiator temperature drops below 25°C, the fan stops.
– speed setting
Use the up/down buttons to set the speed.
01 – 1 800 RPM (factory setting)
02 – 2 400 RPM (slightly increases fan noise)
Installation and Assembly
The fan unit can be installed onto various types of radiators (steel or iron).
It cannot be mounted onto aluminium electric heaters, as these are not magnetic.
Each type of radiator requires a dierent installation method.
Before installing, check what type of radiator you will be installing the fan onto.
A. Installing onto a Radiator (Distance between Panels ≥70 mm)
>70 mm
Bekijk gratis de handleiding van EMOS P56PR2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EMOS |
| Model | P56PR2 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 11186 MB |
