EMOS P5525N handleiding
Handleiding
Je bekijkt pagina 4 van 80
4
4.2 To set the minutes when the programme should turn on (1ON), press the MINUTE button once
to slowly set the minute value. If you hold down the button, the value changes more rapidly.
Release the button once the time of choice in minutes appears on the screen.
4.3 To set the end of the programme (1OFF), press the TIMER button and set the time as described
in points 4.1 and 4.2
Note:
(a) If you wish to change a previously set programme, proceed as described in points 4
to 4.3 in section F and enter new values to overwrite the previous settings.
(b) Once a programme is set, press the CLOCK button to immediately return to real
time display. If you don’t, real time will be displayed automatically after 30 seconds
of inactivity.
Random Setting
1. The random setting feature turns the connected appliance on and o irregularly at
a 10 to 31 minute interval from 18:00 to 6:00.
2. Plug the timer socket into a mains socket and set the programme using the ON/
AUTO/OFF button to AUTO so that you can start/end the random function.
3. Press the RANDOM button once; the letter R will light up on the right of the screen
and the random function is now active. The socket will be o for 10 to 31 minutes.
After that, the function will switch to the opposite mode, i.e. on.
4. Pressing the RANDOM button stops the random function and R will disappear from
the screen.
Cancelling/Restoring a Previously Set Programme
Pressing the ON/AUTO/OFF button allows you to cancel/restore a preset programme;
the display on the screen changes in this order:
1. “ON” cancel a preset programme; the appliance will stay on the whole time.
2. “AUTO” restore a preset programme; the appliance will turn on and o automatically
in accordance with your settings.
3. “OFF” cancel a preset programme; the appliance will stay o the whole time.
Note:
A previously set random function will only activate if the timer socket is in AUTO mode.
If the random function is on, the auto on/o programme functions between 6 pm and
6 am are not active.
Connection
1. Set the on/o programmes on the timer socket as described above.
2. Turn o the electrical appliance.
3. Plug the appliance’s power cable into the timer socket and plug the timer socket
into a mains socket.
4. Turn on the appliance.
5. The appliance will now be turn on/o based on your set programmes until you
manually cancel the setting.
SAFETY WARNINGS
• If the screen isn’t working, plug the timer socket into a 230 V AC socket and let it
charge – the screen should light up in about 2 hours and the socket should be fully
functional. To recharge fully, leave it in the socket for approx. 12 hours.
Bekijk gratis de handleiding van EMOS P5525N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EMOS |
| Model | P5525N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6121 MB |
