EMOS E5010 handleiding
Handleiding
Je bekijkt pagina 6 van 84
6
1. Long press the SNOOZE•LIGHT button until the altitude value starts ashing.
2. Use the UP and DOWN buttons to set the correct altitude. Setting range is from -190 m to
2 000 m, in 10 m increments. Holding the button adjusts value faster. Conrm the set altitude
value by pressing SNOOZE•LIGHT.
3. The weather forecast icon will start ashing. Use the UP and DOWN buttons to set the appropriate
weather forecast icon to match the current weather – doing so accelerates the weather station‘s
ability to calculate an accurate weather forecast. Conrm the set icon by pressing SNOOZE•LIGHT.
Atmospheric Pressure – History
The station shows atmospheric pressure in hPa or inHg and keeps a history of pressure readings
for the last 12 hours.
Moving the weather station to another place will aect the measured values.
Measurement will stabilise within 12 hours of battery insertion or relocation of the weather station.
Press the DOWN button repeatedly to display measured pressure values for the last 12 hours.
The measured value + time dierence will be displayed in elds no. 13 and 14.
Temperature, Humidity and Pressure Trends
temperature, humidity
and pressure trend
indicator
rising constant falling
Moon Phase
The moon phase is displayed in eld no. 15. Icons for the main phases of the moon are as follows:
new moon
waxing
crescent
rst quarter
waxing
gibbous
full moon
waning
gibbous
last quarter
waning
crescent
Displaying Maximum and Minimum Temperature and Humidity Readings
Press the UP button repeatedly to display the maximum and minimum temperature and humidity
readings.
Holding the UP button while viewing MAX/MIN values will erase the values from memory.
Alarm Settings
The weather station allows setting 2 alarms.
Repeatedly pressing the MODE button will show the alarm time for alarm A1, A2 in eld no. 17.
While viewing the alarm time, long press the MODE button and use UP and DOWN to set the alarm
time of choice.
Activate the alarm by pressing DOWN while showing the alarm time in eld no. 17.
After activation, the alarm will be indicated by icon A1 , A2 in eld no. 1, 2.
Pressing the DOWN button again will deactivate the alarm; the alarm icon disappears.
Snooze Function
Alarm ringing can be postponed by 5 minutes using the SNOOZE•LIGHT button located on the top of
the weather station.
Press the button when the alarm starts ringing. The alarm icon will be ashing.
To cancel SNOOZE mode, press any other button – the icon will stop ashing and will remain on
the screen.
The alarm will be re-activated the next day.
Brief Station Display Backlighting
The display will illuminate for 10 seconds after pressing the SNOOZE•LIGHT button.
Bekijk gratis de handleiding van EMOS E5010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EMOS |
| Model | E5010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7162 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Breedte | 22 mm |
| Diepte | 197 mm |
| Hoogte | 123 mm |
