EMOS E5010 handleiding
Handleiding
Je bekijkt pagina 4 van 84
4
Button Button press Button press and hold (3 seconds)
CH (B*)
Display values for sensor 1/2/3 and
activate cycling mode to display values
from sensors 1/2/3
Repeat search for sensor signal and pair
sensors 1/2/3.
SNOOZE
LIGHT
(C*)
1. Snooze – postpone alarm by 5
minutes
2. Brief screen illumination.
Set altitude and change weather
forecast icon.
ALERT
(D*)
Turn temperature alert on/o Set temperature alert.
UP (E*)
1. View MAX/MIN measured values for
temperature and humidity
2. One step forward in settings mode.
1. Erase MAX/MIN values from memory
2. Fast forward in settings.
DOWN
(F*)
1. View pressure history in the last 0
to 12 h
2. One step back in settings mode.
Fast backward in settings.
G – hole for hanging on the wall
H – battery compartment
I – stand
Sensor Description
See g. 3
A – LED
B – LCD screen
C – hole for hanging on the wall
D – battery cover
E – battery compartment
F – selector for channels (CH 1, 2, 3)
G – selector for temperature units (°C/°F)
H – wired sensor with temperature probe
(1 m)
Getting Started
1. Insert batteries into the weather station (3× 1.5 V AAA) rst, and then into the wireless sensor
(2× 1.5 V AAA). When inserting the batteries make sure the polarity is correct to avoid damaging
the weather station or sensor. Only use 1.5 V alkaline batteries of the same type; do not use
rechargeable 1.2 V batteries. Lower voltage may cause both of the units to not function.
2. Place the two units next to each other. The weather station will detect the remote sensor signal
within 3 minutes. If signal from the sensor is not detected, long press the CH button on the
weather station to repeat the search.
3. If the outdoor temperature reading disappears from the display, long press the CH button on the
weather station. The weather station resets all values and repeats the search for sensor signal.
4. If you want to have the sensor placed indoors and measure outdoor temperature and indoor
humidity, thread the wire probe under a window that is not frequently used. Frequent opening
may damage or destroy the probe. The outdoor portion of the temperature wire probe must be
anchored so as to prevent its tearing o in the wind.
5. We recommend placing the sensor on the north side of the house. The range of the sensor may
decrease substantially in areas with large number of obstacles.
6. The sensor is resistant to dripping water, however, it should not be permanently exposed to rain.
7. Do not place the sensor onto metal objects; doing so will reduce the transmission range.
8. If the low battery icon is displayed, replace batteries in the sensor or weather station.
Switching Channels and Connecting Additional Sensors
1. Select channel 1, 2 or 3 for the sensor by repeatedly pressing the CH button. Then, long-press
the CH button. The icon will begin ashing.
2. Remove the cover from the sensor‘s battery compartment and insert batteries (2× 1.5 V AAA).
Bekijk gratis de handleiding van EMOS E5010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EMOS |
| Model | E5010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7162 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Breedte | 22 mm |
| Diepte | 197 mm |
| Hoogte | 123 mm |
