Emko EPM-7790 handleiding
Handleiding
Je bekijkt pagina 20 van 37
20
Operation Screen
SET Value Screen
Ýf Set value is changed while the motor is running, analogue output is affected
simultaneously by change on the set value. Analogue output is increase or
decrease to the new value according to the and parameters.
i
4.2.1 Changing and Saving Set Value While The Motor is Running
4.2 Changing and Saving Set Value
P
SET
P
SET
When SET button
is pressed, SET
value is shown on
the display, and
display starts to
blink
Operation Screen
P
SET
P
SET
SET Value Screen
Change the SET
value with
increment and
decrement
buttons.
4.2.2 Changing and Saving Set Value While The Motor is not Running
Press SET button
for saving
the SET value
New set value is
shown on the display
Display stop blinking
and operation screen
is shown.
SET Value can be adjusted from minimum set value parameter to maximum set value
parameter , they can be accessed from programming parameters.
If no operation is performed in Set value changing mode for 20 seconds, device
turns to operation screen automatically.
i
SET Value Screen
P
SET
P
SET
Operation Screen
P
SET
P
SET
SET Value Screen
Display stop
blinking and
operation screen
is shown.
Operation Screen
When SET button
is pressed, SET
value is shown on
the display, and
display starts to
blink
Change the SET
value with
increment and
decrement
buttons.
Press SET button
for saving
the SET value
Bekijk gratis de handleiding van Emko EPM-7790, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Emko |
| Model | EPM-7790 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4031 MB |
