Emko EPM-7790 handleiding
Handleiding
Je bekijkt pagina 12 van 37
12
aa
3.1 Terminal Layout and Connection Instructions
3.Electrical Wiring
c
c
c
c
You must ensure that the device is correctly configured for your application.
Incorrect configuration could result in damage to the process being controlled,
and/or personal injury. It is your responsibility, as the installer, to ensure that
the configuration is correct.
Device parameters has factory default values. These parameters must be set
according to the system’s needs.
Only qualified personnel and technicians should work on this equipment. This
equipment contains internal circuits with voltage dangerous to human life.
There is severe danger for human life in the case of unauthorized intervention.
Be sure to use the rated power supply voltage to protect the unit against
damage and to prevent failure.
Keep the power off until all of the wiring is completed so that electric shock and
trouble with the unit can be prevented.
Torque
0.5 Nm
Max. 2.5mm / 0.098 inch
Wire Size:
14AWG/1mm²
Solid /Stranded
Screw driver
0.8x3mm
Bekijk gratis de handleiding van Emko EPM-7790, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Emko |
| Model | EPM-7790 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4031 MB |
