Elysia Xmax handleiding
Handleiding
Je bekijkt pagina 4 van 19
4
Link
Links the control voltages of each compressor band . You can go from
independent to full link. When in full link, the xmax acts more like a
classic stereo VCA compressor. The band with the most energy takes over
the control voltage of the other 2 bands. You can control who should be
the master band with the individual thresholds.
Example: In most cases, the low band has the most energy. If you want the
mid band to be the master, just turn down the low threshold and increase
the mid band threshold until you reach the desired compression.
Hit it!
Activates the xmax (LED yellow) or deactivates (LED white) it with a
hardwire bypass (Meterings remain active). In deactivated state, the
input is directly routed to the output by a hardwire bypass.
Increased Compressor Ratio (punch)
A higher ratio (1:1.45 to 1:2.55) for all compressor bands (LED red: active).
Low Fequency Mono Maker (lowmo) (page 11)
A high-pass lter aecting only the side band, ltering the low frequen-
cies below 150Hz (LED red: active).
Metering
The display for the gain reduction of the mid, low and side bands as well
as the soft clip limiter peak reduction. Shows the amount of compression
and peack reduction measured in dB as an optical support for the
acoustic events.
Bekijk gratis de handleiding van Elysia Xmax, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elysia |
| Model | Xmax |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1723 MB |
