Elvita CTC6860V handleiding
Handleiding
Je bekijkt pagina 42 van 396
42 Installation - ENGLISH
INSTALLATION
WARNING!
Read the safety information and the full instructions before installing or using this product.
WARNING!
• If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer’s service agent
or similarly qualified persons in order to avoid a hazard.
• Use the new hose sets supplied with the machine. Do not reuse old hose sets.
• To ensure your safety, connect the plug to an earthed socket. Check carefully to ensure that your socket is
properly and reliably earthed.
• Make sure that the machine is connected to water and electrical supplies by a suitably qualified person
in accordance with the manufacturer’s instructions and local safety regulations.
CAUTION!
The inlet hose must be connected to the cold water supply.
Installation tools
Tools needed for installation (not included).
A. Measuring tape
B. Screwdriver
C. Scissor
D. Spirit level
E. Hole saw drill bit
F. Pencil
G. Screwdriver
H. Spanner
Installation area
Keep the following in mind when choosing a location to install the machine:
• Avoid direct sunlight.
• Sufficient ventilation.
• Room temperature above 5°C.
• Keep away from heat sources such as coal or gas appliances.
• The surface should be rigid, dry, and level. Stability is important to prevent the machine from wandering.
WARNING!
• Make sure that the machine does not stand on the power cord.
• The plug must be accessible after installation.
Bekijk gratis de handleiding van Elvita CTC6860V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CTC6860V |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 38961 MB |
