Handleiding
Je bekijkt pagina 6 van 397
6 Safety - ENGLISH
WARNING!
Risk of fire!
• The following symbol can be found on the product. It is a warning and indicates that the refrigerant and
insulation blowing gas are flammable.
• During transportation and installation of the product, ensure that none of the components of the
refrigerant circuit become damaged. The refrigerant, isobutane (R600a), contained within the refrigerant
circuit is flammable.
• In case of leakage of gas and other flammable gases, turn off the valve of the leaking gas and then open
doors and windows. Do not unplug the product and other electrical products because sparks may cause
a fire.
• If the refrigerant circuit is damaged, avoid open flames and sources of ignition and thoroughly ventilate
the area surrounding the product.
• Do not alter the specifications or modify the product in any way.
• Do not place flammable items near the product.
Safety during installation
WARNING!
• Do not damage the refrigerant circuit.
• When positioning the product, ensure the power cord and power plug are not trapped or damaged. A
damaged power plug may overheat and cause a fire.
• When positioning the product, ensure the stability of the product according to the instructions.
• This product must be placed on a level surface of hard material.
• This surface should be strong enough to support a fully loaded product.
• Ensure that the power cord is securely connected to the socket.
• Disconnect the product from the mains before installing accessories.
• When positioning the product, ensure the power plug is accessible.
• Do not install the product in a location with direct sunlight.
• Do not install the product in areas with moisture or where it can get splashed with water, as it can harm
the electrical insulation properties.
• Keep ventilation openings outside the product clear of obstruction.
• Do not install the product without sufficient space and air ventilation around the product. This leads to
overheating.
• Do not install the back of the product too close to a wall. There is a risk of fire if the compressor gets
overheated.
• Do not install the product close to radiators, cookers or other heat sources.
WARNING!
• Do not connect the product to the power socket if the product is damaged. Contact the retailer from
which you purchased the product.
• The product must employ a dedicated power socket, meaning that the power socket must not be shared
with other products.
• Do not locate multiple portable socket outlets or portable power supplies behind the product.
• The power plug must match the power socket equipped with a ground wire.
• Do not use extension cords and do not lengthen the power cord.
• After positioning the product, it is recommended to wait at least 2 hours before connecting the product to
the mains.
• If the fluctuation of voltage in the installation area exceeds the single phase alternating current of
220~240V/50Hz, use an AC automatic voltage regulator of more than 350W.
Bekijk gratis de handleiding van Elvita CKSI4177, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CKSI4177 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 41450 MB |
