Handleiding
Je bekijkt pagina 6 van 477
6 Safety - ENGLISH
Safety during installation
WARNING!
• Do not damage the refrigerant circuit.
• When positioning the product, ensure the power cord and power plug are not trapped or damaged. A
damaged power plug may overheat and cause a fire.
• When positioning the product, ensure the stability of the product according to the instructions.
• This product must be placed on a level surface of hard material.
• This surface should be strong enough to support a fully loaded product.
• Ensure that the power cord is securely connected to the socket.
• Disconnect the product from the mains before installing accessories.
• When positioning the product, ensure the power plug is accessible.
• Do not install the product in a location with direct sunlight.
• Do not install the product in areas with moisture or where it can get splashed with water, as it can harm
the electrical insulation properties.
• Keep ventilation openings outside the product clear of obstruction.
• Do not install the product without sufficient space and air ventilation around the product. This leads to
overheating.
• Do not install the back of the product too close to a wall. There is a risk of fire if the compressor gets
overheated.
• Do not install the product close to radiators, cookers or other heat sources.
WARNING!
• Do not connect the product to the power socket if the product is damaged. Contact the retailer from
which you purchased the product.
• The product must employ a dedicated power socket, meaning that the power socket must not be shared
with other products.
• Do not locate multiple portable socket outlets or portable power supplies behind the product.
• The power plug must match the power socket equipped with a ground wire.
• Do not use extension cords and do not lengthen the power cord.
• After positioning the product, it is recommended to wait at least 2 hours before connecting the product to
the mains.
• If the fluctuation of voltage in the installation area exceeds the single phase alternating current of
220~240V/50Hz, use an AC automatic voltage regulator of more than 350W.
CAUTION!
This product performs well within the climate class SN, N, ST, T. See section "Climate classes", page 67. The
product may not work properly if it is exposed to temperatures above or below temperature ranges spanning
from 10°C to 43°C for a long period.
Safety during operation
WARNING!
Do not store flammable, volatile, highly corrosive or explosive substances (such as aerosol cans that contain a
flammable propellant), in this product. There is a risk of damage to the product, fire accidents or explosions.
WARNING!
Keep burning candles, lamps and other items with naked flames away from the product to avoid the risk of
fire.
Bekijk gratis de handleiding van Elvita CKFI4177, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CKFI4177 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 54425 MB |
