Handleiding
Je bekijkt pagina 35 van 86
GB
35
Control panel
First use and installation
Starting up and temperature regulation
The temperature selector knob is located on the top of the
refrigerator compartment.
Setting “0” means:
O.
Turn the knob clockwise to turn on the appliance.
Setting “1” means:
Highest temperature, warmest setting.
Setting “7” (end-stop) means:
Lowest temperature, coldest setting.
Cleaning before use
Before using the appliance for the rst time, wash the
interior and all internal accessories with lukewarm water and
some neutral soap so as to remove the typical smell of a
brand new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as
these will damage the nish.
Installation position
Warning!
Before installing, read the instructions carefully for your
safety and the correct operation of the appliance.
Position the appliance away from sources of heat such as
stoves, radiators, direct sunlight, etc.
Maximum performance and safety are guaranteed by
maintaining the correct indoor temperature for the class of
unit concerned, as specied on the rating plate.
This appliance performs well in climate class ST. The
appliance may not work properly if it is left for a longer
period at a temperature above or below the indicated range.
Important! Good ventilation is essential around the
appliance to eectively dissipate heat and ensure ecient
operation and low power consumption. So make sure
there is adequate free space around the appliance. We
recommend there is at least 75 mm clearance at the rear,
at least 100 mm above the appliance and at the sides, and
enough free space in front to allow the door to be opened
through 160°.
Important! Normally, we advise that you select a setting
of 2, or 3 or 4. If you want the temperature to be higher or
lower, please turn the knob to a warmer or colder setting
accordingly. When you turn the knob to a lower setting,
this can improve the energy eciency. Otherwise, a higher
setting will lead to more energy consumption.
lmportant! High ambient temperatures (e.g on hot summer
days) and a cold setting (position 6 or 7) may cause the
compressor to run continuously!
Reason: when the ambient temperature is high, the
compressor has to run continuously to maintain a low
temperature in the appliance.
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Appliances must not be exposed to rain. Sucient air must
be allowed to circulate around the lower rear area of the
appliance, as poor air circulation can aect performance.
Built-in appliances should be positioned away from heat
sources such as heaters and direct sunlight.
Levelling
The appliance should be level in order to eliminate vibration.
To make sure the appliance is level, it should be upright with
both adjusters rmly in contact with the oor. You can also
adjust the level by unscrewing the appropriate level adjuster
at the front (use your ngers or a suitable spanner).
Electrical connection
Caution! Any electrical work required to install this
appliance should be carried out by a qualied or competent
person.
Warning! This appliance must be earthed. The
manufacturer declines any liability if these safety measures
are not followed.
Bekijk gratis de handleiding van Elvita CKF3144V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CKF3144V |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 8868 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Kleur van het product | Wit |
| Deurscharnieren | Rechts |
| Ingebouwd display | Nee |
| Gewicht | 44000 g |
