Handleiding
Je bekijkt pagina 31 van 256

Installation - ENGLISH 31
Before connecting the hob to the mains power supply
The hob must be connected to the mains power supply only by a qualified person.
• Check that the domestic wiring system is suitable for the power used by the hob.
• Make sure the connection parameters of the product (fuse rating, voltage and frequency) match the mains power
supply. If in any doubt, consult a qualified electrician.
• To connect the hob to the mains power supply, do not use adapters, reducers, or branching devices. They may cause
overheating and fire.
• The power cord must not touch any hot parts and must be positioned so it does not get hotter than 75 °C at any point.
After installing the hob
When the installation is complete (see section "Install the hob", page 33), make sure that the following installation
requirements are followed.
Installation requirements:
• Make sure that the power cord cannot be reached through cupboard doors or drawers.
• Make sure that there is a good flow of fresh air from outside the cabinetry to the bottom of the hob.
• If the hob is installed above a drawer or cupboard space, make sure there is a thermal protection barrier below the
bottom of the hob.
• Make sure that the isolating switch is easy to reach after the hob is installed.
Connect the mains power
Before installation, see section "Safety during installation", page 5 and section "Installation options and requirements",
page 30.
WARNING!
Read the safety information and the full instructions before installing or using this product.
DANGER!
• To ensure your safety, the electric connection must be made by a qualified electrician. The plug must
be connected to an earthed socket.
• Never turn on a malfunctioning product. If the product is malfunctioning, broken or has a cracked
surface, pull the power plug, switch off the circuit breaker and contact the support.
• A malfunctioning product may cause electric shock.
• There is a danger of physical injury due to sharp edges during the installation of the product.
• Any changes to the electrical wiring in your home must only be made by a qualified electrician.
Wiring diagram
Connect the hob to the mains according to the electrical wiring diagram.
Bekijk gratis de handleiding van Elvita CIH9650S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Elvita |
Model | CIH9650S |
Categorie | Fornuis |
Taal | Nederlands |
Grootte | 23011 MB |