Handleiding
Je bekijkt pagina 26 van 254
26 Troubleshooting - ENGLISH
Pan type is wrong.
• Make sure your cookware is suitable for induction heating, see section "Suitable cookware", page 16.
• Pan detection circuit is damaged, replace the power board.
Pot diameter is too small.
• Make sure your cookware is suitable for induction heating, see section "Suitable cookware", page 16.
• Pan detection circuit is damaged, replace the power board.
The hob has become too hot.
• Wait for temperature to return to normal. Turn off the hob and restart.
• Pan detection circuit is damaged, replace the power board.
WARNING!
• Any repair performed by someone who is not a qualified technician puts the users of the product at risk
of personal injury.
• Any warranty claim resulting from repairs performed by someone who is not a qualified technician shall
not be covered by the warranty.
U is displayed for both the rear and front cooking zone on the same side.
The problem can have different causes. Follow the instructions for the suggested causes to solve the problem.
The power board and the display board connection failure.
Contact an authorised service technician to have the connection checked.
The display board of the communication board is damaged.
Contact an authorised service technician to have the display board replaced.
The main board is damaged.
Contact an authorised service technician to have the power board replaced.
WARNING!
• Any repair performed by someone who is not a qualified technician puts the users of the product at risk
of personal injury.
• Any warranty claim resulting from repairs performed by someone who is not a qualified technician shall
not be covered by the warranty.
The E1 error code is displayed
Supply voltage is above the rated voltage
Check if the power supply is working properly. Turn on the power if no errors are found.
WARNING!
• Only authorised technicians may carry out repairs.
• If you experience problems with the product, please see if the user instructions and troubleshooting
information in the user manual can help you find a solution. If the problem persists:
– turn off the product,
– unplug the product from its power supply, and
– contact the support.
Bekijk gratis de handleiding van Elvita CIH4662S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CIH4662S |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 25069 MB |
