Handleiding
Je bekijkt pagina 34 van 264
34 Installation - ENGLISH
CAUTION!
• Check the durability of the furniture that the hob will be mounted in.
• Check the thickness and carrying capacity of the benchtop that will carry the hob. Check the durability
after the cuts are done. See section "Technical specifications", page 42 for the net weight of the
product. Add supporting parts if needed.
• The cabinet and the benchtop material and surface must be heat- and moisture resistant. Cover the cut
surfaces so that they are heat resistant and waterproof.
• The cross-sectional surface angle to the working plate should be 90°.
• Clean the sawdust after cutting.
• Leave 450 mm space to allow removal of the water tank.
There are two options to mount the hob:
For a surface-mounted installation, cut the benchtop considering the following measurements:
Bekijk gratis de handleiding van Elvita CHF5780S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CHF5780S |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 26996 MB |
