Handleiding
Je bekijkt pagina 15 van 28
15
GB
TEMPERATURE CONTROL
• Connect the freezer to a working power outlet. The “Power” indicator comes on. The
“Run” indicator shines when the freezer is running. The “Alarm” indicator shines when the
temperature in the freezer is too high.
• Use the thermostat knob to set freezer temperature. The numbers “1”, “2”, “3”, “4”, “5”
and “6” do not represent specic temperatures. However, the lower the number, the
higher the temperature in the freezer (and vice versa).
• When the thermostat knob is in the “OFF” position, the freezer is off.
LOCATION
• Before using the freezer, remove all packaging materials (this includes impact protection,
foam rubber and tape from inside the freezer). Remove the protective lm from the door
and the sides of the freezer.
• Place the freezer indoors in a well-ventilated place. The surface must be at and sturdy.
• Protect the freezer from heat sources and direct sunlight. Do not place the freezer in wet
or damp environments. Rust can otherwise arise and impair insulation.
• There must be at least 70 cm clear space above the freezer and at least 20 cm clear
space around the sides and the rear of the freezer. This is to facilitate opening, closing
and heat dissipation.
• Use a warm damp cloth to wipe the interior and exterior of the freezer (add a little
detergent to warm water and give a nal wipe over with water only).
STARTING
Let the freezer run for two to three hours before placing fresh or frozen foodstuffs in it.
In the summer, increase this time to 4 hours. This is because the ambient temperature is
higher then.
Bekijk gratis de handleiding van Elvita CFB3295V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CFB3295V |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 1527 MB |
