Elvita CDM6602V handleiding
Handleiding
Je bekijkt pagina 14 van 301
14 Getting started - ENGLISH
NOTE!
Every cycle with a regeneration operation increases the water consumption by 2.0litres of water, the energy
consumption by 0.02kWh, and the programme duration by 4minutes.
1. Close the door.
2.
Press to turn on the machine.
3.
Within 60 seconds, press and hold for more than 5 seconds to enter the water softener setup mode.
4.
Press to cycle through the available water softener levels (H1, H2, H3 (default), H4, H5, H6).
5.
Press to confirm and to exit the water softener setup mode.
You will exit the water softener setup mode if you leave the settings unchanged for 5seconds.
Run an empty load
Make sure that the machine is installed properly.
1. Plug in the power cord.
2. Open the water tap.
3. Start a programme.
NOTE! Do not put any dishes in the machine.
The machine is ready for use when the programme has been completed.
Bekijk gratis de handleiding van Elvita CDM6602V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CDM6602V |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 35270 MB |
