Elvita CDM5610V handleiding
Handleiding
Je bekijkt pagina 37 van 429
Cleaning - ENGLISH 37
2. Rotate the coarse and the fine filter and then, remove the filter assembly.
NOTE! If you are just cleaning the coarse filter, remove large food remnants and put the filters back in their
intial position.
3. Pull the coarse and fine filter off the filter assembly: gently squeeze the tabs on the coarse filter and pull the it off the
filter assembly.
4. Remove large food remnants by rinsing the filter parts under running water.
For a more thorough cleaning, use a soft cleaning brush or a dish brush.
5. Reassemble the filters in the reverse order.
6. Put the filter assembly in its initial position, then rotate the coarse and the fine filter.
CAUTION! Do not over-tighten the filters.
Clean the hose filter
Check and clean the filter and the hose regularly. The hose filter attached to the water inlet hose prevents damage to the
dishwasher caused by impurities from the water supply or your own water installation (such as sand, dirt, rust, etc.).
1. Turn off the water supply.
2. Remove the hose from the tap.
3. Remove the hose filter.
4. Clean the hose filter under running water.
5. Install the hose filter.
6. Attach the hose to the tap.
Prepare for longer periods of non-use
Do this when the dishwasher will not be used for a long time.
Bekijk gratis de handleiding van Elvita CDM5610V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CDM5610V |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 53239 MB |
