Elvita CDM3600V handleiding
Handleiding
Je bekijkt pagina 23 van 415
Washing - ENGLISH 23
Switch from tablet detergent to powder detergent
When switching from tablet to powder detergent, water softener and rinse aid settings may need to be adjusted. Many
tablets contain built-in water softener and rinse aid, and some even include special-purpose components like glass and
stainless steel protectors. However, these tablets are typically only effective up to 21°dH water hardness. For water
hardness above this level, you will need to add water softening salt and rinse aid separately.
1. Make sure that salt and rinse aid reservoirs are full.
2. Set the water hardness to the highest level and run an empty load. See section "Adjust the water softener level",
page 17 and section "Run an empty load", page 19.
3. When programme is complete, review the user manual and readjust the water softener level so it suits the water
supply.
4. Make the appropriate rinse aid settings. See section "Fill the rinse aid dispenser", page 23.
Purpose of rinse aid
Rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots
and streaks. It also improves drying by allowing water to run off the dishes. Your dishwasher is designed to use liquid
rinse aids.
Fill the rinse aid dispenser
Do this when the indicator light is lit.
CAUTION!
• Only use rinse aid that is intended for dishwashers. Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the dishwasher.
• Rinse aid that is spilled and left on the bottom of the machine may cause foaming in the next wash. If
rinse aid is spilled, use an absorbent cloth to remove the spill.
1. Lift up the handle to open the cap.
2. Fill the rinse aid dispenser to the max level.
CAUTION! Do not overfill the rinse aid dispenser.
3. Slightly press down the cap to close it.
Adjust the rinse aid consumption
Set the rinse aid consumption according to the hardness of the water in your area. Your local water authority can advise
you on the local water hardness. See section "Adjust the water softener level", page 17.
1. Close the door.
2.
Press to turn on the machine.
3.
Press and hold and simultaneously for 3 seconds to enter the settings menu.
4.
Press until flashes to enter rinse aid setup mode.
Bekijk gratis de handleiding van Elvita CDM3600V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elvita |
| Model | CDM3600V |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 50540 MB |
