Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 62 van 140
60 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
3.2. Adjust general automatic settings
The settings applied here are used for all drives and devices, or are applicable to the
drive types defined in the relevant chapter (e.g. for all shades).
3.2.1. Adjust twilight value
You can adjust the threshold value above which twilight/night will be recognised. Note
that on moonlit nights, brightness values short below 10 lux can be achieved. If the twi-
light value is set below 10 lux, shades which are set to “close at night” will remain open
because of the moonlight or retract during the night.
The twilight settings can be accessed by pressing the buttons:
Use the arrow keys to set the value above which twilight or night will be recognised by
the control unit. Default setting: 10 Lux.
Confirm your setting with the OK button.
3.2.2. Adjust movement delays (shading elements)
You can adjust the delay time for shades. The movement delay prevents sun shades
from being constantly extended and retracted when there are rapidly changing light
conditions.
For the shade to extend, the brightness must lie above the set light intensity value un-
interruptedly for the set extension delay time (e.g. 1 minute). For the shade to retract
again, the light intensity for the set retraction delay time must lie below the value with-
out interruption for the set retraction delay time (e.g. 12 minutes). Clever selection of
the delay time “masks out” passing clouds and nonetheless permits the shade to react
quickly to the sun.
The movement delay settings can be accessed by pressing the buttons:
Use the arrow keys to set the values for the extension and retraction delays.
Default setting: Extension 1 minute, retraction 12 minutes.
Confirm your setting with the OK button.
Automatic
Settings
Twilight
System
General
Settings
Automatic
Settings
Movement Delays
System
General
Settings
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
