Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 34 van 140
32 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
Shade settings
The settings are only executed if a shade is in automatic mode and none of the afore-
mentioned alarm functions is active.
The highest priority is given to the outdoor temperature block, followed by timed
closure (extend), night closure (extend) and indoor temperature-block (retract).
Only when the direction and height of the sun agree and there is no active block is the
automatic shading by light intensity engaged.
Setting of the automatic
The automatic blind functions can be accessed by pressing the buttons:
The automatic roller shutter functions can be accessed by pressing the buttons:
Now you can select individual blinds respectively roller shutters and adjust their set-
tings. For each shade the following settings can be changed:
Press the button to set the brightness above which the blind respectively the roller
shutter will be deployed to offer shade.
Adjust value:
Use the arrow buttons to change the value according to your desire. De-
fault setting: 40 kLux.
7.2. Units for sun and wind
Keep closed:
If the blind respectively the roller shutter should remain closed when
there is brightness, select Always. The shading will then remain closed and will only
be retracted when the rain or wind alarms trigger, if these functions have been activat-
ed. The slat (for blinds) and movement position can be adjusted individually. Manual
opening is possible.
Leave open:
If the blind respectively the roller shutter should not react to the bright-
ness, select Never. The shading will then only be closed in the night closing and time
closing periods set by you. Manual closing is possible.
Confirm your setting with the OK button.
For the automatic system to react, the set light intensity value must be exceeded or un-
dercut for the duration of the delay times. This prevents constant up and down move-
Automatic
settings
BlindSystem
Automatic
settings
ShutterSystem
Intensity
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
