Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 32 van 140
30 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
drive again if it is reactivated maually or the next time the frost alarm is triggered.
Please note that the shade rails or other mechanical components can remain iced even
when the outdoor temperature has already risen to a relatively high value.
ATTENTION
Damage to property by moving frozen shades!
The drive and curtain can be damaged if a frozen outdoor shading
system is used.
•For sensitive curtains, set the frost alarm range generously.
•Before manually switching off the frost alarm, make sure that the
rails are not iced up.
Activate:
If the sun shade is to be retracted when there is a frost alarm, select Yes.
Deactivate:
If the sun shade should offer shade regardless of the frost risk (e.g. for in-
ternal awnings), select No (default setting).
Confirm your setting with the OK button.
Press the button to set the wind alarm. The wind alarm protects the sensitive awning
cloth from damage by retracting the awning.
Adjust values:
Use the arrow keys to adjust the value for wind speed and the length of
time by which it must have been exceeded.
Disable:
If the awning should not react to the wind (e.g. internal awnings), select Never
retract (default setting).
Confirm your setting with the OK button.
A wind alarm triggered for the drive will remain active for 5 minutes. Additionally, a
wind delay can be set for shades. Then the automatic functions remain switched off for
the defined period of time after the end of the wind alarm. Manual operation is howev-
er possible again.
System > Automatic Settings > General Settings > Wind Delay
3.3. Setting a wind delay (shades)
Press the button to enable or disable the rain alarm. The rain alarm protects the sensi-
tive awning cloth from damage by retracting the awning.
Enable:
For moisture-sensitive external awnings, select Yes (awning should be retract-
ed when it rains).
Disable:
For internal awnings, select No (awning should not be retracted when it rains,
default setting).
Confirm your setting with the OK button.
Wind Alarm
Rain Alarm
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
