Elsner KNX VOC/TH-UP Touch weiß handleiding

Niet gecategoriseerd

Elsner

68 pagina's

PDF beschikbaar

Handleiding

29 Parameter setting

Sensor KNX VOC/TH-UP Touch • Version: 30.11.2021 • Technical changes and errors excepted.

Set point Comfort

Comfort mode is usually used for daytime mode when people are present. A starting

value is defined for the comfort set point as well as a temperature range in which the

nominal value may be modified.

If set point values are entered separately:

If the comfort setpoint value is used as a basis:

If the comfort setpoint value is used as a basis, the reduction/increment of the value is

set.

If the comfort setpoint is used as the basis without a switching object, a dead zone is

specified for the control mode "heating and cooling" to avoid direct switching from

heating to cooling.

Standby setpoint

Standby mode is usually used for daytime mode when people are absent.

If setpoint values are entered separately:

A starting setpoint value is defined as well as a temperature range in which the setpoint

value may be changed.

Initial heating/cooling set point (in 0.1 °C)

valid till 1st communication

not upon saving the set point value after

programming

-300…800; 210

Min. object value heating/cooling (in 0.1

°C)

-300…800; 160

Max. object value heating/cooling (in 0.1

°C)

-300…800; 280

Starting heating/cooling setpoint (in 0.1 °C)

valid until 1st communication

-300…800; 210

Minimum base setpoint (in 0.1°C) -300…800; 160

Maximum base setpoint (in 0.1°C) -300…800; 280

Reduction by up to (in 0.1°C) 1…100; 50

Increase by up to (in 0.1°C) 1…100; 50

Dead zone between heating and cooling in

0,1°C

(only if both heating AND cooling are used)

1…100; 50

Starting heating setpoint (in 0.1 °C)

valid until 1st communication

-300…800; 180

Starting heating setpoint (in 0.1 °C)

valid until 1st communication

-300…800; 240

Bekijk gratis de handleiding van Elsner KNX VOC/TH-UP Touch weiß, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.