Elsner KNX Touch One Style handleiding
Handleiding
Je bekijkt pagina 79 van 152
77 Adjustment
Room Controller KNX Touch One Style • Status: 30.07.2020 • Errors excepted. Subject to technical changes.
5.2.12. Addressing the unit
The physical address is assigned using the display screen menu Settings > Phys. Ad-
dress. Press the buttons:
The Physical Address menu displays the current address and the status of the pro-
gramming LED (the address is 15.15.255 on delivery).
5.2.13. Service / Access codes
Access codes, that protect certain menu areas from unauthorised changes, can be set
in the ETS or at the screen in the menu Settings > Service. the Service menu can also
be used for re-starting the unit and for re-setting to facory defaults.
Access Codes
The code 1 for General Settings protects the menus
The code 2 for Automatic Settings protects the menus
If an access code has been activated at the touch display but is no longer available for
input, the unit can be unlocked via the ETS.
5.2.13.1. Setting access codes using the ETS
Activate the “Transfer parameters” function for access codes under “General settings”
in the ETS. Then set the codes in the appearing menu.
Access code (for General Settings and for Automatic Settings)
Activate access code No • Yes
Phys. Adrdess
Press the Programming button, in order to address the device to the bus.
Language
Location
Display
TH Sensor
Alarm
Phys. Addresse
Service
(automatic menu for light)
(automatic menu for drives)
Bekijk gratis de handleiding van Elsner KNX Touch One Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX Touch One Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14877 MB |
