Elsner KNX Touch One Style handleiding
Handleiding
Je bekijkt pagina 76 van 152
74 Adjustment
Room Controller KNX Touch One Style • Status: 30.07.2020 • Errors excepted. Subject to technical changes.
5.2.9.2. Setting the TH sensor at the screen
Press the buttons:
The menu is code-protected when access code 2 is activated.
Press Adjust and use the appropriate arrow buttons to correct the measured tempe-
rature and measured humidity upward or downward. The measurement value may
need to be corrected when the temperature or air humidity at the sensor does not cor-
respond to the room average reading (for example when the Room Controller KNX
Touch One Style is positioned in a location which is warmer than average).
Confirm your setting using the OK button.
The intrinsic heat of the unit is already taken into consideration during the temperature
measurement.
Press External component and use the respective arrow buttons to set the percent-
age component of the external temperature and humidity in the TH sensor measure-
ment value.
Pre-setting: 0 %
Confirm your setting using the OK button.
TH Sensor
Adjust
Adjust
External component
Bekijk gratis de handleiding van Elsner KNX Touch One Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX Touch One Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14877 MB |
