Elsner KNX T-UP Touch handleiding
Handleiding
Je bekijkt pagina 7 van 46
5 Safety and operating instructions
Sensor KNX T-UP Touch • Version: 05.09.2022 • Technical changes and errors excepted.
1. Safety and operating instructions
Installation, testing, operational start-up and troubleshooting should
only be performed by an authorised electrician.
CAUTION!
Live voltage!
There are unprotected live components inside the device.
• Inspect the device for damage before installation. Only put undamaged devic-
es into operation.
• Comply with the locally applicable directives, regulations and provisions for
electrical installation.
• Immediately take the device or system out of service and secure it against un-
intentional switch-on if risk-free operation is no longer guaranteed.
Use the device exclusively for building automation and observe the operating instruc-
tions. Improper use, modifications to the device or failure to observe the operating in-
structions will invalidate any warranty or guarantee claims.
Operate the device only as a fixed-site installation, i.e. only in assembled condition and
after conclusion of all installation and operational start-up tasks, and only in the sur-
roundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
For information on installation, maintenance, disposal, scope of deliv-
ery and technical data, please refer to the installation instructions.
2. Description
The Sensor KNX T-UP Touch measures the room temperature. The indoor sensor
can receive an external measured value via the bus and process it with own data to
overall temperature value (mixed value).
The KNX T-UP Touch offers two push buttons that may be used for changing the
ambient temperature (target value), for switching between operating modes or as free
programmable bus push buttons.
The KNX T-UP Touch provides adjustable threshold values. The threshold value
outputs and further communication objects can be linked by AND and OR logic gates.
Additionally, an integrated actuating variable comparator can compare and output
values that are received via communication objects. The sensor has integrated PI
controller for a heating/cooling system.
The integrated display shows the own values and data received from the bus (e.g. date,
time). The device is completed with a frame of the switching series installed in the
building and thus merges with the interior.
Bekijk gratis de handleiding van Elsner KNX T-UP Touch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX T-UP Touch |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4147 MB |
