Elsner Corlo Touch KNX handleiding
Handleiding
Je bekijkt pagina 66 van 148
64 System settings via touch display
Display Corlo Touch KNX • Status: 30.08.2021 • Technical changes and errors reserved.
Then use the Next key (bottom right) to skip to the next setting.
Scroll to the desired setting using the arrow keys on the rocker.
Then use the Next key (bottom right) to skip to the next setting.
Confirm with OK to save and return to the previous menu selection.
You can save using OK at any time, or cancel using the skip back arrow or the
house button without saving.
If the brightness value is fixed and the
control is done via the KNX bus, brightness
(or start brightness) can be set in percent.
Scroll to the desired setting using the +/-
buttons on the rocker.
For all types of brightness control except the
object control (via KNX bus), automatic
switch-off can be set.
This automatic switch off switches off the
ambient lighting after the pre-set waiting
time.
The automatic switch off may be
• set to OFF.
• set to ON.
• switch off if room dark.
If the automatic switch off is activated, you
now set the waiting time until switch off.
Scroll to the desired setting using the +/-
buttons on the rocker.
Bekijk gratis de handleiding van Elsner Corlo Touch KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
