Elsner Corlo Touch KNX handleiding
Handleiding
Je bekijkt pagina 138 van 148
136 Additional settings (ETS)
Display Corlo Touch KNX • Status: 30.08.2021 • Technical changes and errors reserved.
6.1. Interfaces
Mechanical buttons or temperature sensors may be connected to the four analogue/
digital inputs of the Corlo Touch KNX. The configuration is done via the menu.
ETS: Interfaces
Activate the interfaces you want to use.
6.1.1. Interface 1-4
Choose a function:
Input as switch:
If a button with switch function is assigned to the input, select the bus function
"Switch" and specify which value is sent when pressing/releasing the button and when
it will be sent.
Use interface 1 / 2 / 3 / 4 No • Yes
Bus function • Switch
• Changeover switch
• Shutter
• Roller blind
• Awning
• Window
• Dimmer
• 8-bit encoder
• 16-bit encoder
• Scene load
• T-NTC temperature sensor
Bus function Switch
Command when pressing the button • send 0
• send 1
• do not send telegram
Command when releasing the button • send 0
• send 1
• do not send telegram
Send value • on change
• for change to 1
• for change to 0
• for change and cyclical
• for change to 1 and cyclical
• for change to 0 and cyclical
Send all values
(only if sent as "cyclical")
5 s … 2 h
Bekijk gratis de handleiding van Elsner Corlo Touch KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
