Elsner Corlo Touch KNX handleiding
Handleiding
Je bekijkt pagina 125 van 148
123 Automatic functions
Display Corlo Touch KNX • Status: 30.08.2021 • Technical changes and errors reserved.
The supply temperature block prevents ventilation if it is warmer outside than
inside.
Set the rotational speed range you wish to use for ventilation.
Select the periods for night-time re-cooling. Activate and define periods you would
like to use here in the "weekly timer" menu first!
Weekly timer, Page 47
The outdoor temperature lock prevents ventilation when it is cold outside (e. g.
protection of plants against cold). The block only applies to automatic mode, manual
operation is still possible.
Select the periods when you want to activate the ventilation. Activate and define
periods you would like to use here in the "weekly timer" menu first!
Weekly timer, Page 47
The ventilation block is activated when cooling is switched on (object no. 608
"Automatic cooling status" = 1) and prevents ventilation. However, the fan may be
restarted manually immediately.
Use CO
2
No • Yes
Start ventilation from above (in 10 ppm)
only if ventilation based on CO
2
value
50...200; 80
Stop ventilation from below (in 10 ppm)
only if ventilation based on CO
2
value
50...200; 55
Terminate ventilation if the supply air
temp. is higher than the room temperature
No • Yes
Start exhaust ventilation at (in %) 1...100; 10
and increase exhaust ventilation to (in %) 1...100; 80
Use night-time re-cooling for
Period 1 - 16 No • Yes
Ventilate until room temperature
falls below (in 0.1°C)
50...500; 160
Ventilate at level (in %) 0...100; 30
Use outdoor temperature block No • Yes
Close when below (in 0.1°C)
if temperature block is used
-100...200; 50
Use timed ventilation for
Period 1 - 16 No • Yes
Ventilate at level (in %)
only for timed ventilation
1...100; 50
Use ventilation lock No • Yes
Bekijk gratis de handleiding van Elsner Corlo Touch KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
