Elsner Corlo Touch KNX handleiding
Handleiding
Je bekijkt pagina 103 van 148
101 Automatic functions
Display Corlo Touch KNX • Status: 30.08.2021 • Technical changes and errors reserved.
5.1.1. Allocate automation
First of all, you need to decide whether to use automatic functions or not. If this setting
is set to "no", all automatic channels are deactivated, although allocations and settings
may have been made previously.
Assign the desired function to the five automatic channels
5.1.2. Sun position
The sun position is needed to control the shades. The necessary information may be
received via communication objects
no. 609 "automatic sun position measuring value Azimut" and
no. 610 "automatic sun position measuring value Elevation"
or be calculated within the system.
The type of the sun position objects (2 or 4 byte) depends on the device sending the
values.
For the calculation of the sun position, information about the location and time zone
has to be provided. The location may be set by selecting a city or entering coordinates.
Select city:
Send automatically Yes • No
Automatic 1 ... 5 • Do not use
• Light
• Shutter
• Awning
• Roller blind
• Window
• Fan
• Temperature controller
Sun elevation will be • Calculated
• Received via communication objects
Type of solar position objects
only if sun position is received via
communication objects.
• 2 byte
• 4 byte
Sun elevation will be • calculated
• Received via communication objects
Location input using • City
• Coordinates
Country • Belgium
• Denmark
• Germany
• France
• Great Britain
• Italy
• Lichtenstein
• Luxembourg
• Netherlands
• Austria
• Switzerland
• USA
Bekijk gratis de handleiding van Elsner Corlo Touch KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
