Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 68 van 118
66 Setting the parameters and functions for all
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
Determine which weekdays the timer should be active on, and set the switch-on and
switch-off time.
Specify the transmission behaviour of the timer.
Activate and configure the switching time block as necessary. Other functions in the
KNX system can block the timer switch, for example, manual operation or a safety
function.
The possible settings on the device display are explained in the chapter Device control
on the touch display > Weekly timer, page 30.
6.5.12. Information pages 1 and 2
Every information page has two input objects that can be used to receive texts. These
texts are displayed one under another. The texts must not exceed 14 characters in
length.
Insert the name to be shown on the menu page.
6.6. Variable comparator
The integrated variable comparators can output maximum, minimum and average val-
ues.
Active on the following days
Monday/Tuesday/.../Sunday No • Yes
Switch-on time:
Hour 0...23
Minute 0...59
Second 0...59
Switch-off time:
Hour 0...23
Minute 0...59
Second 0...59
Transmission behaviour • switch on/off | down/up
• only switch on | down
• only switch off | up
Use block No • Yes
Blocking object analysis 1 = Block | 0 = Release
0 = Block | 1 = Release
Output after reset is not blocked • blocked
Name [free text]
Use comparator 1/2/3/4 No • Yes
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
