Handleiding
Je bekijkt pagina 6 van 26
User Manual: 1517L, 1717L
SW602763 Rev C, Page 6 of 26
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the VGA or HDMI input connector of the display with the VGA or HDMI video source
respectively by using the VGA or HDMI video cable. Tighten the screws of the video cable for
optimal performance
2. Connect the USB/serial touch cable between the monitor’s USB/serial connector and your
PC’s USB/serial port.
3. Select the correct power cable for your region. Connect the power cable between the AC
power source and the monitor’s AC input power jack.
4. Alternatively, if you have purchased an optional power adapter and elected to use it, connect
the cable between the AC power source and the optional power adapter’s input connector.
Connect the power adapter’s DC output connector to the monitor’s DC input power jack.
5. The touchmonitor ships in an OFF state. Press the power button to turn it on.
AC POWER INPUT:
INPUT VOLTAGE=100-240VAC
DC POWER INPUT:
BARREL ID=6.4mm
PIN OD=2.0mm
BARREL DEPTH=8.8mm
INPUT VOLTAGE=12VDC± 5%
HDMI VIDEO INPUT
VGA VIDEO INPUT
SERIAL
TOUCH SCREEN
OUTPUT
USB
TOUCH SCREEN
OUTPUT
Bekijk gratis de handleiding van ELO E273226, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ELO |
| Model | E273226 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2778 MB |
