ELO 1099L handleiding

Monitor

ELO

30 pagina's

PDF beschikbaar

Handleiding

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 16 of 30

All touchscreen display adjustments made through the OSD are automatically memorized as soon as they are entered.

This feature saves you from having to reset your choices every time the touchscreen display is unplugged or powered off and on. If there is a power failure, the

touchscreen display settings will not default to the factory specifications.

OSD and Power Lockouts

Press and hold the “Menu” and “Down” buttons for two seconds to enable/disable the OSD Locking feature. When the OSD Locking is enabled, pressing any of the

Menu, Up, Down, or Select keys will have no effect on the system.

Press and hold the “Menu” and “Up” buttons for two seconds to enable/disable the Power Locking feature. When the Power Locking is enabled, pressing the power

switch will have no effect on the system.

Temperature Control

The monitor contains a thermal sensor that provides the user with real-time temperature readings. This reading can be found by opening the OSD menu:

Information ► System Temperature. . If the monitor reaches the temperature trigger point, it will turn on the internal fans with different speed to dissipate heat

until the internal temperature is back to 30°C. If the temperature continues to rise and reaches 60°C, the monitor will enter into Thermal Protection Mode.

If the temperature exceeds 60 °C , the following icon will appear in the Main Menu. This will indicate that the Thermal Protection Mode is active.

If the display internal temperature is not reduced below 65 °C for 5 minutes, the display will automatically turn off 60 seconds to prevent permanent

damage.

Temperature Trigger point

Shielding fans x2

30 – 45 °C

20%, 3100rpm

45 – 50 °C

50%, 4600rpm

50 – 55 °C

80%, 7800rpm

55 – 70 °C

100%, 10000rpm

Bekijk gratis de handleiding van ELO 1099L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.