Elna eXtend 664PRO handleiding
Handleiding
Je bekijkt pagina 44 van 100
44
A
• If one of the threads is broken, follow the
re-threading procedure as follows:
* Turn off the power switch and unplug the
machine.
1. Raise the presser foot and pull the thread chain
out to the back of the presser foot, and cut the
chain to separate each of the threads.
Cut off the tangled threads.
2. Re-thread the thread which had been broken.
Example: Re-thread the lower looper thread.
Lower looper thread
3. Turn the handwheel toward you until the needle
comes to its highest position.
Needle thread
4. Pull the threads from under the presser foot with
tweezers and pull out the needle threads above
the needle plate. Draw out 10 cm (4˝) away from
the presser foot. (Draw the needle thread in the
direction A)
Needle thread
Needle
Presser foot
Needle plate
1
2
3
4
1
2
3
4
3
5
6
1
2
3
3
4
5
6
Bekijk gratis de handleiding van Elna eXtend 664PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXtend 664PRO |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 11286 MB |
