Elna eXtend 664PRO handleiding
Handleiding
Je bekijkt pagina 34 van 100
34
Changing to Two-thread Serging
Attach the 2 thread converter to the upper looper for
2-thread sewing.
* In case of two-thread serging, use one needle
thread and the lower looper thread. Remove
other threads.
To attach the 2 thread converter
Put the tip of the 2 thread converter into the hole on
the upper looper, and slide the 2 thread converter
down into the holder.
2 thread converter
Upper looper
Holder
To remove the 2 thread converter
Pull tab on the holder toward you lightly. Push the
bottom of the 2 thread converter up and pull it out.
Tab
For standard two-thread serging, set the machine as
illustrated.
Lower looper pre-tension setting lever
(ST position)
Changeable thread guide (lower position)
Standard two-thread serging is as illustrated.
Wrong side of fabric
Needle thread
Right side of fabric
Lower looper thread
1
2
3
5
6
7
8
10
9
1
2
3
7
8
9
10
4
5
6
4
Bekijk gratis de handleiding van Elna eXtend 664PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXtend 664PRO |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 11286 MB |
