Elna eXplore 320S handleiding
Handleiding
Je bekijkt pagina 14 van 100
14
SECTION 2. GETTING READY TO SE
W
Connecting the Powe
r
Supply
1 Turn the power switch off.
2 Insert the machine plug into the machine socket.
3 Insert the power supply plug into the wall outlet.
4 Turn the power switch on.
Power switch
Machine plug
Machine socket
Power supply plug
Wall outlet
NOTE:
Before connecting to the power supply, make sure the
voltage shown on the machine conforms to your
electrical power.
WARNING:
While in operation, always keep your eyes on the sewing
area, and do not touch any moving parts such as the
thread take-up lever, flywheel or needle.
Always turn off the power switch and unplug from the
power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- w
hen cleaning the machine.
Do not place anything o
n the foot control, otherwise the
machine will run intermittently.
Controlling the Sewing Speed
Foot control
Sewing speed can be varied by the foot control.
The harder you depress the foot control, the faster the
machine runs.
Operating Instr uctions:
The symbol "O" of a switch indicates the "off" position.
For an appliance with a polarized plug (one blade wider than the other):
To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way.
If
it does not fit fully in the outlet, reverse the plu
g. If it still does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
The foot controller Model YC-482J or TJC-150 is used with this sewing machine (USA market only).
q
w
e
r
t
Bekijk gratis de handleiding van Elna eXplore 320S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXplore 320S |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 15945 MB |
