Elna eXplore 220S handleiding
Handleiding
Je bekijkt pagina 14 van 96
10
Seam Allowance Lines
The lines on the needle plate help you measure
seam width.
The number shows you the space between the cen-
ter needle position and the line on the needle plate.
The numbers at the front are in millimeters. The
numbers at the back are in inches.
How To Drop the Feed Dog
The feed dog must always be up for normal sewing
and down for special sewing, such as free motion
embroidery, button sewing, etc.
Remove extension table and open bobbin cover.
Push the feed dog lever down and slide it to the right
until lever ts into notch.
When special sewing is complete, pull the feed dog
lever down and slide it to the left until lever ts into
place. Hand turn the ywheel to raise the feed dog.
Stitch Selection Knob
The needle must be at a high position before select-
ing a stitch. Turn the ywheel toward you to raise the
needle.
Turn both the stitch selection knob and the stitch
length knob to select a stitch.
Set the stitch length knob between 0 and 4 to access
stitches B, 1-10 (240S) and B, 1-6 (220S).
Set the stitch length knob on “+
.
S.S.
.
–
” to access
stretch stitches C, 11-20 (240S) and C, 7-12 (220S).
Bekijk gratis de handleiding van Elna eXplore 220S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXplore 220S |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 9471 MB |
