Elna eXperience 540S handleiding
Handleiding
Je bekijkt pagina 72 van 100
66
Darning
Extend the buttonholder q completely open. Place
both threads to the left under the foot. Insert fabric
under the foot and lower the needle at the starting
point w. Lower the foot. Sew.
The size of one darning cycle is variable.
However, the maximum darning cycle length e is
2 cm (3/4˝) and the maximum darning cycle width
r is 7 mm (1/4˝).
To sew another darning cycle with same size —
raise foot, move fabric, lower foot and sew when the
dot is blinking t.
Repeat sewing in a different direction until the
darning covers the rip or hole.
Machine Settings
q Pattern: #09
w Presser foot: Automatic buttonhole foot R
e Needle thread tension: 1–6
zxc
q
w
e
r
v
t
y
u
q we
Setting memory darning size
To darn a length less than 2 cm (3/4˝) u, stop the
machine after sewing the desired length and press
the Reverse key y. The darning length has now
been determined. Restart and sew until the
machine stops automatically.
To adjust the evenness of darning
Fabric and the number of layers can affect darning.
If one side of darning is higher or lower than the
other, make them even by pressing the or key.
If left corner is lower than right side, press .
If left corner is higher than right side, press .
NOTE: d5 is default setting. Evenness can be set
between d1 and d9.
(d5) (d4) (d6) (d5)
(–) (+)
Bekijk gratis de handleiding van Elna eXperience 540S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXperience 540S |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 9982 MB |
